We believe strongly that we can and must do something different.
Our aim is to make your ideas come true.
Brewery Equipments
10000L Mash Tun
- Feb 18, 2016
- Ray Lee
- le brew house
10000L Mash Tun
Description
10000L Mash tun is a vessel used in the mashing process to convert the starches in crushed grains into sugars for fermentation. TBE mash tuns are insulated to maintain a constant temperature. The mash tun can be single-function or can also have a false bottom and spigot so that the sparging process can be done in the same vessel. Steam jacket design will allow The TBE systems are designed to do both decoction mashing and infusion mashing. The mashing tun/kettle is made out of stainless steel or copper.
Standard Configuration
unction: Grain mashing
Tank Capacity: 10kL (+25% Headspace minimum)
Dimention: Φ2800mmx4500mm
Interior Shell: SUS304 full welded; TH=4mm
Exterior Shell:SUS304 full welded; TH=2.5mm
100% TIG welding with pure argon gas shield
Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner
Insulation: Rock wool; TH=80mm
Heating: Steam
Steam Jacket: Dimple plate on bottom and side
Conical top and sloped bottom
Stainless steel top mounted manway
360° coverage CIP spraying ball
Agitator with VFD speed motor and turbine reducer
7000L Malt hopper mounted on top
4pcs completely SUS304 heavy duty legs with leveling pad
Thermowell for high accuracy temperature sensor
Description
10000L Mash tun is a vessel used in the mashing process to convert the starches in crushed grains into sugars for fermentation. TBE mash tuns are insulated to maintain a constant temperature. The mash tun can be single-function or can also have a false bottom and spigot so that the sparging process can be done in the same vessel. Steam jacket design will allow The TBE systems are designed to do both decoction mashing and infusion mashing. The mashing tun/kettle is made out of stainless steel or copper.
Standard Configuration
unction: Grain mashing
Tank Capacity: 10kL (+25% Headspace minimum)
Dimention: Φ2800mmx4500mm
Interior Shell: SUS304 full welded; TH=4mm
Exterior Shell:SUS304 full welded; TH=2.5mm
100% TIG welding with pure argon gas shield
Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner
Insulation: Rock wool; TH=80mm
Heating: Steam
Steam Jacket: Dimple plate on bottom and side
Conical top and sloped bottom
Stainless steel top mounted manway
360° coverage CIP spraying ball
Agitator with VFD speed motor and turbine reducer
7000L Malt hopper mounted on top
4pcs completely SUS304 heavy duty legs with leveling pad
Thermowell for high accuracy temperature sensor
Previous Product
5000L Mash Tun
Do something for your dream.
Start from selection
Location
CN Jinan- 2668
Jichang Rd.
Email Us
Call Center
24/7 Support
+86 531 88161066
Request A Quote