Is it good to use electric heating for 1000Liter system? For the heating of the beer brewery equipment, it can be electric, steam, direct fire etc. for the brewhouse. For the electric heating, usually it is used for the s...
Butterfly valves used for brewery equipment The butterfly valve is used a lot in the beer brewing equipment to control the wort/beer on/off. There are manual type, pneumatic type and the pneumatic type can also have the A...
The Roughness requirements of the beer brewing tanks Most of the beer brewing tanks today are made by sanitary stainless steel. As we know the smoothness inside of the tank is very important for beer brewing, which mostly...
Sparging After lautering, there is still wort remaining in the grain bed usually. In order to drain out the wort thoroughly, we must sparge hot water on grain bed through a ring with nozzles, which is called sparging. In ...
The pressure control for conical fermenter Utilizing conical tank for fermenting, it without pressure at the begining. In order to emission bad taste of volatile substances. When recycle CO2 adopt slight pressure(lower 0....
What will cause negative pressure in the fermenters? Many breweries today prefer to cleaning the fermentation tanks with hot water or sterilizing the tanks with steam, actually it is very dangerous. Under ordinary pressur...
Testing method of wort gravity in beer making process In a mashing process, we usually test the wort concentration/gravity by saccharimeter, a float gauge, which is made based on density of liquid theory, less density for...
How to check commontroubles of glycol chiller? There are four troubles for chiller, leakage, blocking, break, burn. So how to check them. First, observation. For chilling system, Observe if all pipeline have break, frosti...