We believe strongly that we can and must do something different.
Our aim is to make your ideas come true.
Brewery Setup Blog
Why have such configuration of MLWT+KT
- Apr 19, 2016
- helen
- 7998
- brewhouse
Why have such configuration of MLWT+KT
The brewmaster usually consider many factors in the actual process of beer brewing, for brewing good quality beer,
they choose the configuration can meet himself demands.
For example MLWT+KT
There might three factors can cause have such configuration:
Factor 1:
The brewmaster consider filter the wort by nature/gravity, then the sprent grain can leave at filter
and the wort can go into the whirlpool by it's Gravity. So they separate the whirlpool under the mash&lauter tun.
Now most brewries use the pump to recycle the wort thus help with the lauter.
Factor 2:
For the configuration MLT+KWT(Mash&Lauter tank+Kettle&whirlpool tank),
strictly brewmaster think if adopt electric heating method, the electric tube will effect the whirlpool.
So they also seperate whirlpool tank under mash&lauter tank. But the effect for the whirlpool is small.
Based on the reason (2), according to the configuration MLWT+KT, the whirlpool tank can by the way be used as wort storage tank, but the operate is a little complicated.
Factor 3:
Usually in a brewpub have a hot liquor tank is a good news.
But for save the cost, with the such confiauration MLWT+KT,the kettle tank can also be used as a hot liquor tank
and wort can storage at whirlpool tank.So then we can sparging.
Edited by Derrick
Sales Manager in Tiantai Company
Email:brewery@cnbrewery.com
The brewmaster usually consider many factors in the actual process of beer brewing, for brewing good quality beer,
they choose the configuration can meet himself demands.
For example MLWT+KT
There might three factors can cause have such configuration:
Factor 1:
The brewmaster consider filter the wort by nature/gravity, then the sprent grain can leave at filter
and the wort can go into the whirlpool by it's Gravity. So they separate the whirlpool under the mash&lauter tun.
Now most brewries use the pump to recycle the wort thus help with the lauter.
Factor 2:
For the configuration MLT+KWT(Mash&Lauter tank+Kettle&whirlpool tank),
strictly brewmaster think if adopt electric heating method, the electric tube will effect the whirlpool.
So they also seperate whirlpool tank under mash&lauter tank. But the effect for the whirlpool is small.
Based on the reason (2), according to the configuration MLWT+KT, the whirlpool tank can by the way be used as wort storage tank, but the operate is a little complicated.
Factor 3:
Usually in a brewpub have a hot liquor tank is a good news.
But for save the cost, with the such confiauration MLWT+KT,the kettle tank can also be used as a hot liquor tank
and wort can storage at whirlpool tank.So then we can sparging.
Edited by Derrick
Sales Manager in Tiantai Company
Email:brewery@cnbrewery.com
Previous News & Artical
What’s the reason of beer have different savor?
Do something for your dream.
Start from selection
Location
CN Jinan- 2668
Jichang Rd.
Email Us
Call Center
24/7 Support
+86 531 88161066
Request A Quote