Microbrewery plant manufacturers design for sale | Beer Brewing Tech | Tiantai® 2-150bbl Brewery Equipment Proposal

Jul 31, 2017
helen
Click

Wort cooling and Wort aeration

Wort cooling and Wort aeration The wort generally was transported to the whirlpool tun when the boiling process is finished. After separated the hops and hot break, the following steps should be done quickly: 1.A quickly ...

Jul 31, 2017
helen
Click

Wet-milling

Wet-milling In craft beer brewing, the malt milling usually adopts wet-milling. Firstly, steep the malt into 50℃ water for 15-20 minutes. After the water content in malt reaching 30%, convey the malt to mill (the gap be...

Jul 31, 2017
helen
Click

Key technology of main fermentation process

Key technology of main fermentation process The main fermentation, also called primary fermentation, or fermentation, is the main stage of whole fermenting process. It means transfer the wort to the alcohol, co2 and other...

Jul 31, 2017
helen
Click

What filter should I choose for beer

What filter should I choose for beer? The main filter way includescotton cakefilter, kieselguhr filter (or diatomaceous earth filter,DE filter), Cardboard filter, twin flow system(TFS), Cross-flow microfiltration(CMF), St...

Jul 31, 2017
helen
Click

The reason for thick mash

The reason for thick mash In the brewing process, sometimes the mash will be too thick when the mash is heated to definite temp, which will make the temp of mash increased slowly or even stopped increasing. This phenomeno...