+86 531 88161066

Brewery Setup Blog

Nov 10, 2017
helen
Click

The features and notes for Decoction mashing

The features and notes for Decoction mashing The most difference for decoction mashing is that part of the mash need to be heated to boiling and mixed with the unboiled mash, then the whole mash temperature will be raised...

Nov 10, 2017
helen
Click

Brewing process-How to lauter the wort 1

Brewing process-How to lauter the wort 1 After mashing, we need to lauter the mash and get the wort. So, how to lauter the wort? There mainly has seven steps(this method is based on separated mash tun and lauter tun). 1. ...

Nov 10, 2017
helen
Click

The factors to influence first wort lautering

The factors to influence first wort lautering 1.Wort tackiness Higher temperature, lower wort tackiness and quicker lautering speed. The lautering time 12 Plato wort is longer 20% than 15 plato wort. 2.Grain bed resistanc...

Nov 10, 2017
helen
Click

The factors which influence lautering

The factors which influence lautering When do lauter operating , the influence to wort lautering should be considered which made by each factor. Also need try best possible to reduce negative effect which produced by harm...

Nov 10, 2017
helen
Click

How to lauter the wort 2

How to lauter the wort 2 Now, lets continue to talk about the wort lauter process. Step 4: Recycle the wort. After standing for 10-20mins, the spent grain layer has been formed, then, we need to recycle the wort to get th...

Nov 10, 2017
helen
Click

Malt crushing method

Malt crushing method Normally malt crushing can be used by dry method or wet method, but it have certain apply range. Malt crushing by dry method is one traditional way, which have simple configuration and easy operating....

Nov 10, 2017
helen
Click

The advantages of plate heat exchanger(PHE)

The advantages of plate heat exchanger(PHE) Compared with other heat exchanger, plate heat exchanger has higher heat exchanging efficiency and takes up smaller space. Main advantages: 1.High Heat Conductivity. The plate i...

Nov 10, 2017
helen
Click

The cooling jacket and temperature sensor for fermentation tanks

The cooling jacket and temperature sensor for fermentation tanks 1.Cooling Jacket Cylindrical conical fermenter cooling jacket normally have 2 or 3 cooling zones. Tanks area have 2 or 3 cooling zones, cone area have one c...